Tag Archives: Engineering Blog

Ways on Properly Selecting a Good-Sized Server Racks

Electronics Enclosure Engineering Blog Engineering Materials No Comments
Engineering Blog, Engineering Materials, Electrical Enclosure, Electrical Boxes, Electronics Enclosure, Server Racks,

The Three-Phase power technology for server racks is not very exclusive to operating remote power management products. Actually, there are several solutions that can be accommodated by this technology. When you compare it to a single-phase power, it utilizes a fewer circuit making electricity in power loading more balanced. It also decreases the number of needed PDUs in order to power equipment. It can also significantly reduce the amperage being used inside the server rack cabinets.

To further explain this topic, there is a traditional rack environment that has 20-amp circuits that are going to be required to provide 64 amps of available power. Assuming the maximum power load of about 80%. In a contrasting scenario, the 3-phase circuit can give power up to 51.6 amps per circuit. That is equivalent to 82 amps of available power. It will only require 2 circuits in order to accommodate the 80% load.

The cost-efficiency required in order to run a 3-Phase power is very important. The electricity experts have an estimation that in the near future, the cost to acquire electricity (compared to recent costs) has the possibility to rise by 10%. When it comes to IT budgets it can get to 20-30%.

The other electricity or power-related required aspects should include the number of outlets that the server rack will be needing. Including the plug/receptacle requirements as well as the redundancy requirements.

When it comes to selecting a server rack with the appropriate, sufficient internal space to be able to accommodate your equipment is needed. Also, it ensures that the server rack has ample space to house the equipment that will be needed for future expansions. Especially when there are unplanned purchases of additional equipment.

The server rack mount equipment is being measured using the Electronic Industries Alliance (EIA) standards. The standard measurement is one “Rack Unit” that has the equivalence of 1.75” in height. Always be aware that the available space for accessories – the environmental monitoring devices, remote power management devices, LCD monitors and battery back-up – might be important.

With this example, if an engineer needs to accommodate at least 20 2U rack servers, they are more likely to buy a server rack with a height of 44U in able for them to accommodate all the needed accessories. These can be the 1U patch panel, as well as the 2U UPS battery back-up. The internal height of the server rack is being measured by getting the measurements from the tallest point of any side of the rack server up to the bottom of the chassis. The internal depth that is being measured internally is being done on front and rear doors. In addition to this, the internal width is being measured from the other side of the panel to the other.

Improved Graphics Department Output Contributes to the Decision Making of Enclosure Manufacturing Companies

Electronics Enclosure Engineering Blog Engineering Materials No Comments
Electronics Enclosure, Engineering Blog, Engineering Materials, Graphics Department,

Now that the winter is over, the seasons are starting to transition from being very dreary gray to bright colorful spring and summer. Who would not be excited right? With this in mind, I guess every woman like to brighten up their wardrobe. We should start putting away the bulky, drab winter sweaters –including the overstuffed coat- and we should start pulling out the floral dresses, including the crisp white shoes.

Most of the common colors for spring and summer are the: yellows, oranges, and whites. It can shine and glow against the beautiful backdrops of spike green grass and the turquoise blue skies. With this in mind, the natural colors from spring are the best and great improvement over the winter blues.

With these changes in color schemes of things, enclosure manufacturing companies also knows how to give color and various styles to any class of any given standard enclosure. One of the customization services of an electronics enclosure is giving permanent printing graphics that can be put on any type of enclosure surfaces.

And in order for these companies to give you the only best color schemes available for enclosure printing, they should implement certain developments in their graphics department.

The first of these processes would require a double-hit process. This is very much alike in applying a secondary coating for painting your walls. Companies does not only apply one strike of color but they apply a secondary coating when printing one enclosure. Now this makes the color of the printing appear the brightest especially on the finished product.

As many of the electronics enclosure that are available in black material, we recently just found out that printing may appear in lackluster. Like a dark background that was shown through the ink. In able to fortify the text or graphics with the use of the second hit of ink, the color is then now accentuated. Gradually, the ink pops against the darkness.

Even on white or gray surfaces of electronics enclosure, companies should double hit the process. The printed colors will start to stand out and it makes it a bit easier to read the graphics to be able to be recognized.

What are the Measurement Specifications for Electronics Server Rack Specifications?

Electronics Enclosure Engineering Blog Engineering Materials No Comments

For industrial terms, the 19-inch rack is a server or network frame within an enclosure that is being utilized to be mounted on multiple equipment units. Each of the server rack modules contains a front panel that is 19 inches or 482.6 mm wide in specifications. The horizontal measurement then includes some of the edges in the internal space of the rack.

The different IT equipment that was being manufactured with sizes to be able to fit inside a rack will usually be called the rack-mountable or rackmount. The terms: rack-mounted system, rack-mount chassis, server rack and subrack are the most common ones.

Specifications for the 19″ Racks in the Data Centre

Both server rooms, as well as data centers both, have the computing equipment installed inside the standard 19″ racks. These server racks can be in the form of two or four post formats. The height for the server racks is also being standardized in the multiples of 44.50mm or the 1.752 inches. The height measurement being given is also determined as the one rack unit or “U.” The IT industry greatly considers the sever rack structure of 42U tall.

By utilizing the standard server racks, the networking hardware or even the AV equipment can be safely configured or efficiently set up without the need for the floor space or even shelf installations. The server racks serve a wide variety of placement demands, from securing everything – from basic equipment to very light computing applications.

Specifications for Rack Unit Servers

The right measurement for each server rack is 1.75 inches wide, the standardized rank units are primarily designed to be able to assist administrators in mounting, buying, or uninstalling the servers. Computers and also other devices are already included.

The data servers or cabinets can be chosen based on their functionality. It also includes cooling and cabling management options. These cabinets or server racks can greatly vary by U height, front door style, width, security, as well as the other features.

Specifications for Patching cabinets

The size range from 4u to 8u when it comes to server rack height has a very shallow depth. It has an approximate size of 275mm. These server rack cabinets are being utilized inside a small office or classroom applications. It can also house the 1 or 2 patch panels. There can be also a small switch if it is required. These small and compact server rack cabinets will only require limited space.

Specifications for the Wall Mount Server Cabinets

These wall mount server cabinets have measurements that can range from the 6u tp 21u in height dimensions. It is widely available in measurements of 390mm, 450mm and 600mm. These server rack cabinets are also being used inside the small office/classroom/Retail applications. But because of the larger size needed for this size range, this has also been utilized to house small communications equipment for small office use. This is also where the floor space is unavailable because of the security and location issues.

What does Green Mean When it Comes to Plastic Electronics Enclosure Maker?

Blogging Electronics Enclosure Engineering Blog No Comments

There are moments when we find ourselves totally dumbfounded by the idea of having green cars or technology. Honestly, what it primarily means is green means helping the environment with good alternatives. I happen to see a Mercury commercial where the host or the endorser stated that the car model was the “first green vehicle of the year”. As dumbfounded as I was before, I turned to my friend and told her “does that mean that no manufacturer has ever used a green paint before?” I know I was stupid, but let me redeem myself.

This happened before the world was into the concept of using greener alternatives to save planet earth. Until recently, people has started the green movement to save our planet from greenhouse gases, etc. Before I thought that going green means planting more trees and cleaning up & segregating our trashes. Include in my concept of “green” movement before the ideas of recycling, having alternative renewable energy, and hybrid vehicles. Green movement is not just a color but it is a lifestyle.

I am more glad to tell you that now that I am more knowledgeable about these things, and Green movement was more alive and well compared before. Green movement is not just about rehabilitating its image to appeal younger generations, but we are also doing this for the future generations to come.

In finding new ways to create a more sustainable and renewable energy sources without the depletion of current natural reserves is a very important and crucial aspect & part of our planet in today’s generation. Saving the planet is not all about buying the proper energy saving equipment or getting the latest technology innovation or having the right appliances. It starts with utilizing and using the things that you already have.

There are enclosure manufacturing companies that produces only plastic enclosures but they are tailor-fitted to be used for a wide variety of uses. Look into the company’s capability of using greener alternatives to conserve resources and save planet earth. How does a plastic enclosure serve as a useful equipment in searching for other alternatives to energy? Throughout the process of researching and discovering whether a company offers greener alternatives to their plastic enclosure, do not hesitate to send them a question or contact them directly.

All it takes is clear communication on what you what to achieve and how you will achieve it.

What is the Value Present in the Supply of Transmission Equipment that is being Used?

Electronics Enclosure Engineering Blog Engineering Materials No Comments

The main purpose of a Grid Assurance is it serves as a solution that helps in dividing the cost across several utilities. The shared inventory approach in achieving cost-efficiency can give people savings in terms of protection, warehousing, purchasing, and it also includes the maintenance cost that comes with possible parts replacements of the equipment. It makes the cost more affordable compared before to enable companies to acquire immediate access for much larger scale equipment that is on hand and on shore.

Once a major disastrous event happens, a company’s tendency is to mainly focus on stabilizing the operations quicker to avoid loss of profit. This should be done as fast as possible. With this in mind, the Grid Assurance effectively works if each of the subscriber do logistics plans for their equipment before a disaster occurs. The planning should make sure that the equipment that are being used and delivered should be delivered before the predicted event. In determining when the critical replacement will happen for the equipment should come up gives the companies an extra confidence in making sure that the grid assurance is present to deliver the customers energy supply even after a disaster happens.

In addition to this, another pressing challenge comes with the regulatory approval. It is widely recognized that grid utility companies are now being a bit hesitant in coming up with decisions about major investments because these decisions should be backed up by a regulatory assurance that the costs that are incurred should be recouped in form of rates.

With this in mind, Gird Assurance is not taking initiative and being proactive because it has recently received two affirmative orders coming from the Federal Energy Regulatory Commission (FERC) that gives the regulatory clarification on the issues that can be related to prudency, compliance, ratemaking and other affiliated pricing transmissions. This is related to the owing entities that participates in the Grid Assurance project.

While the Grid Assurance is not currently FERC regulated, the different charges that comes with this such as: cost-based subscription fees akin to the FERC regulated transmission formula rates. The different costs that comes with subscription fees together with the FERC orders should be able to facilitate the members’ different abilities in recovering the expenses that comes with Grid Assurance subscription.

While not FERC regulated, Grid Assurance charges cost-based subscription fees, like FERC-regulated transmission formula rates. These cost-based subscription fees along with the FERC orders will facilitate members’ ability to recover their Grid Assurance subscription expenses.

With this in mind, Grid Assurance was originally formed to give answers because of the needs that arises in the electrical industry: this need comes in the restoration of the electrical grid that should quickly follow other HILF events. This will happen by increasing the critical transmission equipment that comes with on-shore and on-hand inventory. Different companies contribute to the utilities’ ability to restore the energy delivery back properly, giving help to protect the nations’ consumers and the communities from the possible devastating effects potential calamities might bring. This will help in maintaining the way of life of the people and the economical balance in the country.